Next:
2.1 What to Bring to
Up:
SMTO User's Manual
Previous:
1.7 Checklist Before Your SMTO
2. Observing: A Pocket Cookbook
2.1 What to Bring to the Telescope
2.2 An Overview of Where Things Are
2.2.1 The Control Room
2.3 An Overview of the Commands
2.3.1 Setup
2.3.2 Pointing
2.3.3 Calibration Of Data
2.3.4 Continuum Observations
2.3.5 Spectral Line Observations
2.3.6 Other Useful Commands
2.4 Starting Up
2.4.1 Telescope/Building Drive Start Up
2.5 Continuum Observations
2.5.1 Setting the Source: SOURCE
2.5.2 Setting the Receiver (4 Color Bolometer): RX
2.5.3 Setting the Receiver (SIS/HEBOL): RX
2.5.4 Setup
2.5.5 Pointing: POINT
2.5.6 Focus: ZFOCUS,XFOCUS
2.5.7 Taking Beam-Switched Data: CONOFF
2.5.8 Taking Stare Data: CTRACK
2.5.9 Taking Mapping Data: CMAP
2.5.10 Related Commands: SKYDIP
2.5.11 Quick Data Reduction
2.6 Spectral Line Observations
2.6.1 Setting the Source
2.6.2 Setting the Receiver: RX
2.6.3 Setting the Line Frequency: LINE
2.6.4 Setting the Backends: BACKEND and BE_FE
2.6.5 Calibration: CAL, EFF
2.6.6 Pointing: POINT, LPOINT, LWPOINT
2.6.7 Position Switching: PSWITCH
2.6.8 Beam Switching: WSWITCH
2.6.9 Raster Maps Using position switching: PRASTER
2.6.10 Beam Switching Maps: WRASTER
2.6.11 On-the-Fly Mapping: PMAP
2.7 Shutdown
2.8 Tidbits of Information
SMTO Manual Version 6.5, © May 2002, The SMTO Staff
